STEP 1: SURFACE PREPARATION

Wash the vehicle thoroughly with ShamPol. Remove any scratches and worn paint with our paint restorer S17+ or, alternatively, with our scratch remover S3 Gold.

STEP 2: APPLICATION OF THE PREMIUM WAX

Smear a small amount (about the size of a hazelnut) of wax evenly onto the black hands puck.

With even force, apply the wax on the paint surface in partially overlapping circular motions.

A few seconds later, a film of dried wax residue will appear.

STEP 3: REMOVAL OF THE WAX RESIDUE

Wipe off most of the film with the fleecy grey MicroPLUS cloth. The wax residue may not have to be completely removed.

STEP 4: HAND-MASSAGE OF THE WAX FOR A SUSTAINABLE PAINT PROTECTION AND IMPROVED GLOSS FEATURES

Interestingly, Carnauba, the toughest naturally existing wax in the world melts at our body temperature. Therefore, we recommend massaging the paint surface, after wiping off approx. 90 % of the wax residue, with the palm of your hand to melt the wax molecules and ensure a tight paint-wax bond.

After the “massage”, the wax will cure into a shell-like protection, fastened to with the paint surface.

STEP 5: FINISHING

Next, gently polish the entire vehicle with the red MicroPlus cloth to remove cloudiness and loose wax residue.

Polish until a high gloss finish is to achieve. In order to minimise polishing time, the hand-massage (step 4) can be omitted. The paint protection is even exemplary without this step!

OUR RECOMMENDATION FOR HOT DAYS

The hand-massage (step 4) can be omitted when the atmosphere temperature is high. To archieve the same effect, just leave the car in the sun for 30 minutes after removing 90 % of the wax residue (step 3).

Then park the car under shade and polish the now-softened wax with the red MicroPlus cloth until a high gloss finish is achieved.